re: VFO fine-coarse tuning
Posted by
wayne burdick on
Jul 18, 2008; 3:45pm
URL: http://elecraft.85.s1.nabble.com/VFO-fine-coarse-tuning-tp365854p535996.html
Hi Ken (and Bill),
Quantizing the VFO in COARSE mode is on the list for a future firmware
revision. This will eliminate the offset you described.
73,
Wayne
N6KR
> I have noticed what you describe below with all versions of firmware.
> I have verified that it occurs both on transmit and receive. At the
> most you could be 99Hz off of your displayed freq. If you were at say
> 14.200099 in the fine mode and then switched to coarse display of
> 142000 you would actually be transmitting and receiving on 14.200099.
> The 99Hz will always be there even if you move the VFO. I find this
> irritating but since I am aware of it I can work around it. I hope
> that it will merit a future update
>
> 73, Ken N0QO
---
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com