Re: Backward balun
Posted by
dw-4 on
Aug 07, 2010; 2:10pm
URL: http://elecraft.85.s1.nabble.com/Re-Backward-balun-tp5383661.html
If you have an mfj analyzer and a 4:1 balun, you should be able to test
it.
Just connect up a 50 ohm resistor to the unbalanced side.
Set the analyzer for the frequency of interest and look at the "R" that
the analyzer measures.
Keep the leads going from the analyzer to the balun as short as
possible.
I wind my own baluns and use this to check them to see how broad banded
they are.
N1BBR
--
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html