And yet they certified it.
> If the SPE does that, which is 17dB gain, then it does not conform to FCC
> rules that limit gain to 15dB.
>
> Bob, N6CM
>
> On Tue, Aug 10, 2010 at 12:37 PM, W4GRJ <
[hidden email]> wrote:
>
> > Depends on the Amplifier, I have a SPE Expert 1K-FA.....10watts drive =
> 500
> > watts out
> >
> > Jack
> > W4GRJ
> >
> >
> > -----Original Message-----
> > From:
[hidden email]
> > [mailto:
[hidden email]] On Behalf Of Lyle Johnson
> > Sent: Tuesday, August 10, 2010 1:33 PM
> > To:
[hidden email]
> > Subject: Re: [Elecraft] Amplifier
> >
> >
> > > ...I presently have a K3 10 and am wondering if the 10 watts will be
> > enough to kick the new amp
> >
> > Yes, it will. You'll likely get more than 100 watts but less than 200
> > watts output with 10 watts of drive. If you want the full 500+ watts,
> > then you'll probably need 30W to 40W of drive.
> >
> > 73,
> >
> > Lyle KK7P
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home:
http://mailman.qth.net/mailman/listinfo/elecraft> > Help:
http://mailman.qth.net/mmfaq.htm> > Post: mailto:
[hidden email]
> >
> > This list hosted by:
http://www.qsl.net> > Please help support this email list:
http://www.qsl.net/donate.html> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home:
http://mailman.qth.net/mailman/listinfo/elecraft> > Help:
http://mailman.qth.net/mmfaq.htm> > Post: mailto:
[hidden email]
> >
> > This list hosted by:
http://www.qsl.net> > Please help support this email list:
http://www.qsl.net/donate.html> >
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>