Posted by
drewko on
Aug 27, 2010; 3:59pm
URL: http://elecraft.85.s1.nabble.com/K3-Modification-day-for-SN-01195-tp5463862p5470059.html
Thanks for the helpful info, Nick. I have an unmodified K3 of the same
vintage and just yesterday was trying to decide what order to perform
the mods.
A couple of mods I didn't notice on your list that might be applicable
are the Systhesizer Stiffener Plate and the 12v Sense mod.
I'll skip the synth plate as that doesn't seem to be a problem with my
K3 (I have attached a baffle to the back of my speaker). As for the
12v sense, I haven't had any problems but seems like I might as well
install it.
73,
Drew
AF2Z
On Wed, 25 Aug 2010 20:54:32 -0500, Nick, WA5BDU wrote:
> I've been storing up a list of modifications I wanted to install in my
>K3 (S/N 01195, July 2008) and managed finally to do them today. Due to
>the number (nine) and varying descriptions, purposes and locations in
>the rig, I tried to organize my thinking by putting them in a list,
>trying to see which ones I really need or want, how hard they might be
>to install, and which ones might be best done together due to being on
>the same board, etc. Some are documented in Elecraft's modification
>kits & parts area and some in the application notes area.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html