Login  Register

Re: K3 using Kenwood mics

Posted by Nr4c on Aug 30, 2010; 5:57pm
URL: http://elecraft.85.s1.nabble.com/K3-using-Kenwood-mics-tp5478411p5479352.html

Can't say about the Kenwood hand mics, but my Heil HM-10 Dual mic that I
bought for my Kenwood TS-570 works fine plugged into the front panel of my
K3.  Is the MH2 an electret mic?  The Heil Proset for the K2/K3 is, as in
ICOM, so that might explain some of the difficulty.

...bc

-----Original Message-----
From: WILLIS COOKE [mailto:[hidden email]]
Sent: Monday, August 30, 2010 12:12 PM
To: Steve WU9B; Elecraft Reflector
Subject: Re: [Elecraft] K3 using Kenwood mics

I don't know the reason, but the hand mikes for my TS440S and TS850SAT do
not
work for my K3 nor does the MH2 for the K3 work with the Kenwoods.  I
recently
bought a TS480SAT but I have not hooked it up yet so don't know if it will
interchange.
 Willis 'Cookie' Cooke
K5EWJ




________________________________
From: Steve WU9B <[hidden email]>
To: Jim Brown <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Sent: Mon, August 30, 2010 10:04:43 AM
Subject: Re: [Elecraft] K3 using Kenwood mics

I have used an MC60, the hand held Kenwood Mic that came with my TS440S and
a
Heil HC4 headset/mic wired for the Kenwood. No modifications necessary.
There is
an option in the K3 menus to disable the "UP-DOWN" buttons on the MC-60 that
I
use. It is called CONFIG MIC BTN and you set it to OFF. See page 13 and 57
of
the manual (which you may download while you wait for your K3 to arrive). I
look
forward to owning the Yamaha CM500 one day as well. Raves reviews from all
those
who own it.
Steve WU9B

On Aug 30, 2010, at 7:52 AM, Jim Brown wrote:

> On Mon, 30 Aug 2010 10:30:38 -0400, Linda and Bob wrote:
>
>> I may buy and use a Heil Pro Set Elite with the HC-6 element for hands
free
>> operation with VOX.
>
> The best sounding and most comfortable headset mic is now the Yamaha
CM500.
> It plugs straight into the rear panel jacks of the K3. And it costs about
> $50. The mic plug on the CM500 is a 1/8-in TRS plug. You will need to make
a
> simple connector adapter to use it with other rigs. Many of us are using
this

> headset with the K3 and love it.
>
> 73, Jim K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html