Re: Mounting the Battery Holders in the KX-1

Posted by Joe Planisky on Sep 28, 2010; 2:36am
URL: http://elecraft.85.s1.nabble.com/Mounting-the-Battery-Holders-in-the-KX-1-tp5577736p5577791.html

I ran into exactly the same problem building my KX1.  It seemed like  
the screws provided with the kit were just too short; only a turn or  
two of the thread was engaging (and immediately stripping out.)

I had some longer 2-56 screws and verified that there was still good  
thread in the holes.  I was able to make it work by carefully trimming  
the longer screws to just the right length with a Dremel tool.  The  
longer screws fully engaged all the threads in the holes and hold the  
battery holders securely.

73
--
Joe KB8AP



On Sep 27, 2010, at 7:03 PM, Phil Barnes-Roberts WA6DZS wrote:

> (With photos, too large for the reflector)
> The Problem:
> <http://wa6dzs.blogspot.com/2010/09/mounting-battery-holders-in-kx-1.html 
> >
> The Fix:
> <http://wa6dzs.blogspot.com/2010/09/fix-mounting-battery-holders-in-kx-1.html 
> >
>
> --
> '---O=o=O---'
> 73, Phil Barnes-Roberts WA6DZS  DM04we | Mailto:pbarnrob at ACM dot  
> org
> 42 is not an answer, it's an error code.  The universe is saying
> 'Error 42: meaning to universe not found'  --DoctorMO,  
> ubuntuforums.org
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html