Re: K3 KAT3 power during tune?

Posted by Ken Wagner K3IU on Oct 04, 2010; 11:55am
URL: http://elecraft.85.s1.nabble.com/K3-KAT3-power-during-tune-tp5598731p5598805.html

  I would think the firmware makes that
determination. It always starts out
using 5 watts and I see it jump to 10
watts just before finishing.
KenK3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 10/4/2010 7:29 AM, Sam Morgan wrote:
> I see in the manual, under CONFIG TUNE
> it says:
> "Note1: TUN PWR does not pertain to ATU TUNE , which always uses 5
> or 10 W and is internally controlled."
>
> what determines if 5 or 10 watts is being used?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html