Re: BCB sensitivity
Posted by
drewko on
Jul 19, 2008; 12:30pm
URL: http://elecraft.85.s1.nabble.com/BCB-sensitivity-tp548048p565769.html
Also, while dialing in the L and C values, tap ANT to switch between
CA and CT. However, it seems you can't adjust the two caps
independently; whatever value is dialed in for CA is duplicated for
CT, and vice versa. Is this a bug?
73,
Drew
AF2Z
On Sat, 19 Jul 2008 08:16:37 -0400, AF2Z wrote:
>You can set the KAT3 menu config entry to LCSet. Exit the menu then
>tap ATU TUNE. You can set the L and C values individually with the A
>and B VFO controls. But it doesn't seem to make any difference in the
>AM received signal as far as I can tell. I'm using a 100' wire for an
>antenna.
>
>73,
>Drew
>AF2Z
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com