Re: [K3] 10 dB audio drop with 50/100 Hz DSP filters

Posted by George Dubovsky on Oct 31, 2010; 1:49am
URL: http://elecraft.85.s1.nabble.com/K3-10-dB-audio-drop-with-50-100-Hz-DSP-filters-tp5690502p5690596.html

John, Lyle, RX equalize was it! Thank you very much - I never would have
found that one on my own.

73,

geo - n4ua

On Sat, Oct 30, 2010 at 8:18 PM, Lyle Johnson <[hidden email]> wrote:

> You probably have the Rx equalizer set to boost audio at the tone
> frequency you are using for these measurements.  Set it to flat - Rx EQ
> is not in effect at 50 Hz and 100Hz selectivity of the K3.  It is on my
> list of possible DSP code changes.
>
> Meanwhile, if you really want to use Rx EQ in CW, set the PEAK to 0 dB
> at and just use CUT to shape the passband you want on either side of
> your chosen PITCH.
>
> 73,
>
> Lyle KK7P
>
> > Please, what am I missing?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html