Login  Register

Re: Higher SWR When Using Amp.

Posted by Don Wilhelm-4 on Nov 15, 2010; 12:35pm
URL: http://elecraft.85.s1.nabble.com/Higher-SWR-When-Using-Amp-tp5739639p5739748.html

  Mark,

Where do you have your external wattmeter?  On the output side of the
amp?  If so, then your external wattmeter and the K3 are reading the SWR
of your antenna system when the amp is on standby.  When you put the
amplifier in-line, the K3 will read the input of the amplifier.  In the
meantime your external wattmeter is still reading the antenna system,
and should not be expected to change.


73,
Don W3FPR

On 11/15/2010 6:43 AM, [hidden email] wrote:
> I have noticed when I fired up my amplifier on 40 meters that the SWR reading on the K3 when I tune up is higher then when I tune up on standby.  But what is really odd is on my External Wattmeter the SWR is the same when the amp is active versus standby. On standby my SWR on 40 meter SSB is 1.0 to 1.  When I tune the Amp it goes up to 1.6 to 1.  I realize that it isn't that high but just would like to know if there is an explanation as to why this occurs.  Mark KB3Z
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html