Re: Recommended AGC settings for separation of signalsin CW pile-ups

Posted by David Cutter on Dec 05, 2010; 11:07pm
URL: http://elecraft.85.s1.nabble.com/Recommended-AGC-settings-for-separation-of-signals-in-CW-pile-ups-tp5804756p5806212.html

I recall someone on this list predicting this behaviour and said that he
used a tx shift of 50Hz so that he stood out from the crowd to get in first
shout.

David
G3UNA



Guy Olinger said:
It's not NEARLY on frequency.  It's EXACTLY ON FREQUENCY.  I know what
I'm hearing.  I can hear a hertz in the area around my usual 450 Hz
spot.

This problem is getting worse as frequency accuracy is getting to half
a hertz on modern rigs (half a hertz measured on my K3), and people
use packet spots to arrive on frequency.
73, Guy.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html