Re: K3: memory management commands?
Posted by
Don Wilhelm-4 on
Dec 07, 2010; 12:47am
URL: http://elecraft.85.s1.nabble.com/K3-memory-management-commands-tp5809988p5810082.html
Nate,
Are you looking at the K3 Programmer's Reference Rev C13?
That version shows the MCnnn command to be either a GET or a SET. I
have not tried it, but it does not seem to be limited to reading only
the memory in use. The 'nnn' value gets more complicated if you are
trying to retrieve the "quick memories" or if the memory entry is
flagged for scanning.
73,
Don W3FPR
On 12/6/2010 7:15 PM, Nate Bargmann wrote:
> I know there is the K3 Memory Editor for Windows with .NET, but I am
> curious about the commands used to read and write the memories to the
> K3. The Programmer's Guide is mum on this only offering the MC command
> to read which memory is in use or set a specific memory channel. What I
> don't see is a way to query the programmed memories and update or write
> new ones to the K3. Will this information be made available in an
> updated Programmer's Guide?
>
> 73, de Nate>>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html