Login  Register

Re: [K3] Ameritron RCS-12

Posted by Joe Subich, W4TV-4 on Dec 09, 2010; 9:55pm
URL: http://elecraft.85.s1.nabble.com/K3-Ameritron-RCS-12-tp5820821p5824752.html


Easy enough to get the Ameritron controller working with the K3,
just use the Yaesu FT-1000MP settings in the Ameritron manual
(page 5 and 7) but substitute the equivalent outputs from the K3
ACC jack for those of the Yaesu "Band Data" (Linear) jack.

Unfortunately, I do not believe that the RCS-12 supports the serial
data control of the Rat Pack.  RCS-12 is designed to support three
line BCD (e.g., RCS-10) or 1 of 10 (e.g., RCS-8, microHAM 10 Switch,
etc.) but no serial data (see page 4 & 5 of the RCS-12 manual).

73,

    ... Joe, W4TV


On 12/9/2010 4:26 PM, Mike wrote:

> Is anyone using an Ameritron RCS-12 antenna switch controller? If so, would you share
> the details? FWIW, my switch is a WX0B RatPack.
>
> 73, Mike NF4L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html