Login  Register

Re: K3 question

Posted by Mike Reublin on Dec 10, 2010; 11:18pm
URL: http://elecraft.85.s1.nabble.com/K3-question-tp5824734p5824950.html

I put a macro in M4 that switches to 53 watts PC053; Another in M1 to go back to 100
watts. PC100;

73, Mike NF4L

On 12/10/2010 4:45 PM, bill wade, sr. wrote:

> I have a K3 100 watt transceiver. The amp is a SG500. I use the "power
> set per band " from the config menu to store drive settings
> independently for each band.
>
> Is there any way to set up the K3 so that one can switch on the fly from
> barefoot operation to the amp without going through the necessary manual
> steps?
>
> Bill Wade, Ai4PF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html