Re: P3 and averaging - dillemma or no problem?

Posted by Dave, G4AON on Jan 17, 2011; 9:50am
URL: http://elecraft.85.s1.nabble.com/P3-and-averaging-dillemma-or-no-problem-tp5929936p5931260.html

I have raised this issue with Alan (N1AL), on SSB signals below about S9
they average out to little more than a few dB above the noise floor yet
look quite good with the peak enabled. Like you suggest a peak facility
where the reading decays after a few seconds would be very useful, in
addition when peak is enabled the yellow trace loses it's averaging and
is visually very distracting... I would prefer the trace to still be
smoothed by averaging when displaying peak or perhaps even better would
be to turn off the normal yellow trace when peak with a decay is selected?

73 Dave, G4AON

Ignacy wrote:
 >So one question is what to do with P3 that shows less with averaging?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html