Re: K3: re CW ID macro on SSB

Posted by Nr4c on Feb 15, 2011; 4:16pm
URL: http://elecraft.85.s1.nabble.com/CW-ID-macro-on-SSB-tp6025949p6028164.html

any chance of recording the CW audio on a DVR and replaying and  
recording into one of the memories with the K3 DVR?  then jkust play  
it back on the air.

...bill nr4c


Quoting Richard Ferch <[hidden email]>:

> Scott,
>
> If Ralph's guess is correct, there is a configuration option to do this
> offsetting automatically: look at the CONFIG:CW WGHT option in the
> manual and try setting the automatic VFO offset (tap 5). Note also that
> on 30m and above you will want to use MD7 and MD2 instead of MD3 and MD1
> in your macro command string.
>
> 73,
> Rich VE3KI
>
> VE7XF wrote:
>>> Most of it works except it stays in transmit and the CW "beeps" at the
>>> operating station but only sounds like a series of clicks over the air...
>>
>> Here's my guess, Scott:
>> Perhaps it's working, ie. sending CW over the air, but it is zero beat with
>> the SSB frequency, and therefore nobody hears anything. You need a 700hz
>> (or thereabouts) offset, in a direction compatible with whatever sideband
>> you're using.
>>
>> Remember, it's just a guess - I know nothing about macros.
>>
>> Ralph, VE7XF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html