Posted by
K6LMP on
Feb 15, 2011; 4:39pm
URL: http://elecraft.85.s1.nabble.com/CW-ID-macro-on-SSB-tp6025949p6028277.html
>From Wikipedia (my emphasis in bold):
Modulated continuous wave is defined by the Federal Communications Commission in 47 CFR §97.3(c)(4) as "Tone-modulated international Morse code telegraphy emissions having designators with A, C, D, F, G, H or R as the first symbol; 2 as the second symbol; A or B as the third symbol." See Types of radio emissions for a general explanation of these symbols.
Simply put, MCW uses a fixed audio tone to modulate a carrier wave. This is an older method of sending Morse code, with continuous wave being the more common method used today.
Unlike A1A CW transmissions, A2A MCW morse can clearly be heard on a normal AM radio receiver. It was commonly used by many RDF beacons to send a morse station identifier on a regular basis.
MCW is not allowed in the United States on amateur radio frequencies lower than 50 MHz, as it is a very inefficient use of radio spectrum.
Lew K6LMP
On Feb 15, 2011, at 9:25 AM,
[hidden email] wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html