Re: KPA-500 from Orlando
Posted by
Don Wilhelm-4 on
Feb 15, 2011; 11:26pm
URL: http://elecraft.85.s1.nabble.com/KPA-500-from-Orlando-tp6024743p6029799.html
Bill,
I don't know how many lines you have connected between the THP and the
K3, but the simplistic view would be to use a relay to switch the RF
input between the two amplifiers and also place the non-selected one in
Standby. Of course that simplistic solution would require that both
amplifiers have an input signal line to place the amp into standby
remotely - many do not, but modern amplifiers should IMHO. Older
amplifiers typically have only a front panel switch.
73,
Don W3FPR
On 2/15/2011 6:15 PM, Bill K9YEQ wrote:
> Wayne,
>
> I have my THP HL-2.5kfx, is there a way to control both via the K3? I would
> like to select the device to use based on conditions without going through a
> lot of switching.
>
> Bill
> K9YEQ
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html