Re: KPA-500 from Orlando
Posted by
Phil Salas on
Feb 16, 2011; 12:47am
URL: http://elecraft.85.s1.nabble.com/KPA-500-from-Orlando-tp6024743p6030080.html
"Wayne, I have my THP HL-2.5kfx, is there a way to control both via the K3?
I would
like to select the device to use based on conditions without going through a
lot of switching. Bill K9YEQ"
Unless the design has been changed recently, either the HL1.5 or the HL2.5
(or maybe both - I can't remember) load down the band data lines when the
amp is turned off. If you have a stiff enough band data source (like a TTL
driver), you can actually partially power-up the processor in the THP amp
via the band data inputs when the amp is off. So you may have to switch the
band data lines between the KPA500 and the THP amp. Or use band data for
the THP amp, and the KPA500 RF sense for KPA500 band changing (the KPA500 RF
sense works VERY well).
Phil - AD5X
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html