Re: K3 keying an amplifier

Posted by Joe Subich, W4TV-4 on Feb 16, 2011; 9:52pm
URL: http://elecraft.85.s1.nabble.com/K3-keying-an-amplifier-tp6033183p6037061.html


The same thing can be accomplished with any 2 x 2 or 2 x 4 audio
switcher - left/right become PTT and ALC.   Radio Shack and most
consumer electronics stores have a reasonable selection of A/V
switches generally for less than the cost of a case, switch and
the connectors.

73,

    ... Joe, W4TV


On 2/16/2011 3:43 PM, HarrytheHam wrote:

>
> Fred,
>
> I run a Kenwood TS-590S and the K3 with my Tokyo Hy Power HL-1.2Kfx amp. I
> take the keying and ALC lines from both rigs and connect them to an LDG
> ALK-2 switch (2 port switch) and then connect a set of "common" keying and
> ALC lines from the LDG to the amp. Works just fine.
>
> Harry WE1X
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html