Re: K2 RF Board Resistance Checks

Posted by David Christ on Feb 21, 2011; 10:15pm
URL: http://elecraft.85.s1.nabble.com/K2-RF-Board-Resistance-Checks-tp6046794p6050365.html

What is the maximum safe voltage?  It must be less than 1.5 v as that
is what the Simpson and Triplett VOMs use in their lower ranges, but
how much less?

David K0LUM

At 3:47 PM -0800 2/20/11, Ron D'Eau Claire wrote:

>
>
>I trust you are using a DMM and not a VOM (like the old Simpsons, etc. -
>just about anything with a "wiggly needle" meter ;-)  All of the older
>meters applied a dangerous amount of voltage to the circuit for today's
>solid state components
>
>Good luck!
>
>Ron AC7AC
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html