Re: KX1 MAZX supply voltage
Posted by
Don Wilhelm-4 on
Mar 07, 2011; 2:22am
URL: http://elecraft.85.s1.nabble.com/KX1-MAZX-supply-voltage-tp6095842p6095930.html
Alan,
I would suggest that you respect the manufacturer's maximum voltage
unless you want to take responsibility for you actions.
Yes, most any voltage may work, but there is a breakdown point
somewhere, and if you increase the voltage gradually, you will find that
point for your K3 - it may be an expensive experiment, but destructive
testing is like that.
73,
Don W3FPR
On 3/6/2011 8:30 PM, Allan Taylor wrote:
> I know the book says 14V, but what is the REAL by-gosh MAX supply
> voltage. I have a dandy supply from some sort of computer
> that puts out between 15 and 16V no-load and want to know if it is
> safe to use at home.
>
> I just picked up the unit from a local who is going into a rest home
> and essentially leaving the hobby.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html