http://elecraft.85.s1.nabble.com/autotuner-for-new-amp-tp6165040p6165103.html
The KPA-500 only requires a maximum of 40w for full output.
Mostly 31-35w achieves full power out.
> Hi Tony,
>
> There's no autotuner within the KPA500. I think the introduction of the
> KAT500 will be sometime after the KPA500. Perhaps someone with better
> knowledge than myself will speak to the matter.
>
> I notice the Macro/Power Setting threads going on here as well.
>
> It will be nice if the K3/100 and KPA500 will sense each other and adapt.
> Specifically, the power required output of the K3 might typically be 100
> watts, but something less than that will likely drive the KPA500 to full
> output. Will the K3's power level be able to automatically reset to an
> owner preset level when the KPA500 is inline and out of standby mode?
>
>
> 73,
> Dick - KA5KKT
>
> ----------------------------------------------------------------------------
> ----
>
> I'm sure all this has been discussed but for whatever reason I can't find
> the thread. When the new amp is available, will the compatible autotuner be
> in the same box or separate? Will it be ready at the same time as the amp,
> or later? Any news on its price?
>
> thanks,
> Tony KT0NY
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>