Posted by
w7bia on
Mar 13, 2011; 12:50am
URL: http://elecraft.85.s1.nabble.com/KX-1-Operation-tp6165329.html
Dear folks:
I am using, for the first time, a KX-1. The antenna, as recommended on the
Elecraft FAQ page, is a 24 foot wire and a 16 foot radial. They are
connected to the KX-1 with a BNC to a double banana plug.
I am on the road from time to time and spend a number of evenings in hotel
rooms. Earlier this week, I fired up the KX-1 for the first time since
purchase.
I took the 24-foot antenna and dropped it out the 6th floor window. That
gave me about a 2 to 3 foot horizontal run to the window and the remainder
straight down.
The radial was spread out in the opposite direction along the "dresser" and
then dropping down to the floor for the duration.
Turning it on, I heard absolutely no signals on 75, 40 or 20.
Today, I was outside and spread out the antenna and radial in a horizontal
fashion at about a 45 degree angle to each other.
Signals were heard on 20, but again, nothing on 40 or 75.
What suggestions do the seasoned KX-1 users have?
Thank you VERY much
Arnie
W7BIA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html