Re: [KPA500]And the question is ...
Posted by
David Cutter on
Mar 16, 2011; 6:02pm
URL: http://elecraft.85.s1.nabble.com/KPA500-And-the-question-is-tp6174313p6178256.html
A European model will be required: we don't have the gain restriction you
have, however, we do like stability and putting lots of gain into one box
could be tricky.
David
G3UNA
----- Original Message -----
From: "Phil Townsend" <
[hidden email]>
To: "Bruce Beford" <
[hidden email]>
Cc: <
[hidden email]>
Sent: Tuesday, March 15, 2011 9:31 PM
Subject: Re: [Elecraft] [KPA500]And the question is ...
I'll do it!
Just send me a KPA500 and I am good to go!
Phil
Santa Fe
On Mar 15, 2011, at 3:16 PM, Bruce Beford wrote:
> Mark wrote:
>
>> Who is going to calculated alternate replacement values of the resistors
> in the two attenuators so that the KPA500 may be driven to a > > full 500
> watts by a K3 / 10?
>> Mark, NØOKS
>
> You are, if you intend to try this on your new KPA-500. -Bruce, N1RX
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html