Received KX1

Posted by K8QI on Mar 26, 2011; 5:21pm
URL: http://elecraft.85.s1.nabble.com/Received-KX1-tp6210899.html



I just received my KX1 -with 30/80 meter board and Plug-In Keyer Paddles.

I've read all the posts for the KX1 (they were extremely helpful) and reviewed the Builder pages - soldering ect .



I plan on doing the KX1 board first and do the tests at each phase and the alignment.   Install the Keyer Paddles and make a few contacts on 20 and 40 meters.   After I'm sure all is OK on 20 and 40, then I plan to build and install the 30 meter - 80 meter option.   At this point, I am planning on winding my own toroids .....



Do you have any suggestions for a new kit builder? 



Thanks -



Barry K8QI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html