Re: KPA500 to K3 ACC Connector

Posted by Jack Brindle on Apr 04, 2011; 2:08am
URL: http://elecraft.85.s1.nabble.com/K3-P3-KPA500-tp6236791p6237126.html

Elliott;

The cable is not yet available. But thanks for the very valuable input.
As the internal KRC2 person, I have similar concerns over access to the Auxbus for the KRC2.
There are also KPA500 AUX signals that are very useful aside form the K3.
I am certain we will find a good solution that allows access to the K3 ACC and the KPA500 AUX signals as needed.

Jack Brindle, W6FB

On Apr 3, 2011, at 6:57 PM, Elliott Lawrence wrote:

> Can any of the field testers using the ACC Connector interface verify if the
> K3 end of the cable has a through mounted female connector (back to back
> male/female conncectors) that the mating connector for the PR-6 pre-amp can
> use for access to pin 11 without having to make any wiring changes?  This
> would also enable access to the other K3 functions and the KPA500
> simultaneously.  If not, sounds like a good option to me!!
>
> 73
> Elliott WA6TLA
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html