Posted by
Edward R Cole on
Apr 07, 2011; 1:22pm
URL: http://elecraft.85.s1.nabble.com/phase-signals-RE-SDR-IQ-IF-Questions-tp6250016.html
From: Wes Stewart <
[hidden email]>
"The LP-Pan works well with a decent soundcard, but suffers from the
use of PowerSDR software, which is simply awful in my opinion, and
lots of cabling."
Spectravue runs with the LP-Pan just fine. I am using the
recommended emu-0202 soundcard with a single LP-Pan. The emu
connects with a USB and requires two audio cables to the LP-Pan. The
LP-Pan uses a BNC coax cable to the K3 IF. One one more connector
for 12v. That is more than the coax plus USB cable for the SDR-IQ,
but I do not see what the big deal is. But then if you saw the
wiring in my shack you would understand that comment.
For dual-receive I use the M-Audio Delta-44 soundcard which has four
audio cables and a sub-D15 cable to the computer. But this is not a
standard application.
73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ 500 KHz - 10-GHz www.kl7uw.com
EME: 144-1.4kw, 432-100w, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep
[hidden email]
======================================
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html