http://elecraft.85.s1.nabble.com/Another-thought-for-the-XG3-Utility-tp6292574p6293155.html
> Thank you! My contribution (the XG3 Utility) is just a part of a much
> larger
> Elecraft team effort that brought us the new goodie. I bought one for
> myself at Visalia. Up to now I've been using a naked printed circuit board
> with some wires hanging off it. Now I can figure out what the buttons and
> lights are without counting!
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: Bill (K9YEQ) [mailto:
[hidden email]]
> Sent: Wednesday, April 20, 2011 7:06 PM
> To: 'Dick Dievendorff'
> Cc: Elecraft
> Subject: RE: [Elecraft] Another thought for the XG3 Utility
>
> Dick,
>
> I have mine. Just unplugged the W2 serial cable and voila! How sweet the
> new toy is!! Nice job!!!
>
> 73,
> Bill
> K9YEQ
>
>
> -----Original Message-----
>
> We were showing this on a P3 at the Visalia DX Convention last weekend.
>
> There are two "programmable functions" (sweeps) described on page 10 of the
> XG3 Owner's Manual. The XG3 Utility supports their setup.
>
> You choose the start, end, and step size frequencies with a resolution of 1
> Hz, the time interval between steps (1 to 64K msec), and a check box that
> indicates whether the sweep should be repeated.
>
> Once the sweep settings are sent to the XG3, you can disconnect the PC
> program and initiate the sweep by HOLDing the band up/down buttons (HOLD is
> PF1 and PF2). Tap any button to stop the sweep. Or you can leave the PC
> program connected and click the Sweep 1 or Sweep 2 buttons on the Operate
> page of the XG3 Utility.
>
> See "Edit Sweep Memories" on the Configuration tab of the XG3 Utility. You
> can install the XG3 Utility and peruse Help even if your XG3 hasn't yet
> arrived. I have a fair number of screen shot images of the various dialogs
> in Help.
>
> There's a link to install the XG3 Utility at the bottom of this web page:
>
http://www.elecraft.com/XG3/xg3.htm>
> 73 de Dick, K6KR
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>