Login  Register

Re: XG3 Arrived

Posted by Edward R Cole on Apr 21, 2011; 9:52pm
URL: http://elecraft.85.s1.nabble.com/XG3-Arrived-tp6292867p6295676.html

I bought a 9volt battery for the XG3, today.  Running at 0 dBm on
14.020 it puts out a nice clear CW note reading about S7-8 with the
XG3 sitting about a foot from the K3.  I have a 2m rubber duckie as
antenna on the XG3 and the triband beam 50-feet above the shack on
the K3.  I lowered output to -33 dBm and still have a CW note though
now about S1 and hearing a little ac noise coming thru the K3.

I switched to 28.020 and clean signal at either 0 dBm or -33 dBm;
switched to 144.220 and good signal there, also.  So I guess I  hear
some ac on 20m.  It has nothing to do with the XG3 - End of subject!

BTW the signal is just as stable and on frequency at 2m as on 20m.  I
have had other xtal signal sources that drifted many KHz constantly
for the first 30-min to an hour of use.  I hear NO
drift!  wow!  There was a little freq. offset at 28.020 but I can
always do the calibration if I really care.

Frequency accuracy is fine as it is. Note this is with the K3
equipped with the K3EXREF so it is within 2-Hz accuracy.  Out of
interest I connected the XG3 to my EIP-538 freq. counter and it shows
1.819.997 MHz +/- 2 Hz; 20.020.014 +/- 5 Hz; 144.220.250 +/- 20
Hz.  This counter has an internal TCXO that shows no error with my
Rubidium standard.

I bought it for receiver sensitivity measurements and filter tuning,
and the stability is more than adequate for that.

I haven't played with the XG3 utility but now that my CoilCraft
7-pole LP filters and filter boards from Clifton Labs have arrived I
will try making some response curves, scanning with the XG3.  I am
making up four LP filters for use on the workbench (and with the XG3
when I want to eliminate harmonics).  The filters were free
engineering samples.

I will show the results on my website.


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-1.4kw, 432-100w, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep [hidden email]
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html