Posted by
Greg Buhyoff-2 on
Apr 22, 2011; 6:11pm
URL: http://elecraft.85.s1.nabble.com/Problem-loading-XG3-firmware-tp6297565p6297745.html
Bill, well, this over-educated, self described computer good computer
handler, found the problem. I reseated everything -- the USB to serial
cables were all seated well to begin with. But, I gave the 1/8 inch plug
connected to the RS-232 an extra wiggle and then it seated down a tad more
and all works as advertised. Maybe my stupidity in not checking the easy
stuff first will help someone else. Then again, there in not likely a
member here that is as dumb as I am. Thanks much, Bill, your note made me
all the more intent on finding the problem.
Have a good weekend and, I must say that XG3 is one neat piece of equipment
and worth every penny even with the things I have done with it so far.
Congratulations to Elecraft for another neat and flexible piece of
equipment. I love my Elecraft equipment and thanks to all who develop,
refine, service, support, assemble, ship and communicate with dumb hams like
me.
73 Greg K2UM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html