http://elecraft.85.s1.nabble.com/Problem-loading-XG3-firmware-tp6297565p6297873.html
I'm with you.
> Bill, well, this over-educated, self described computer good computer
> handler, found the problem. I reseated everything -- the USB to serial
> cables were all seated well to begin with. But, I gave the 1/8 inch plug
> connected to the RS-232 an extra wiggle and then it seated down a tad more
> and all works as advertised. Maybe my stupidity in not checking the easy
> stuff first will help someone else. Then again, there in not likely a
> member here that is as dumb as I am. Thanks much, Bill, your note made me
> all the more intent on finding the problem.
>
> Have a good weekend and, I must say that XG3 is one neat piece of equipment
> and worth every penny even with the things I have done with it so far.
> Congratulations to Elecraft for another neat and flexible piece of
> equipment. I love my Elecraft equipment and thanks to all who develop,
> refine, service, support, assemble, ship and communicate with dumb hams
> like
> me.
>
> 73 Greg K2UM
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>