Re: Info on K3 "IF OUT"

Posted by Alan Bloom on Apr 23, 2011; 3:44pm
URL: http://elecraft.85.s1.nabble.com/Info-on-K3-IF-OUT-tp6299452p6299633.html

It is a wideband, low-level signal.  The bandwidth is just limited by the
front-end filters in the K3.  The level is about 7 dB less than the level
at the K3 antenna input (preamp and attenuator off).  On older K3s that
don't have the IF OUT modification the level is less than that, by about
8-10 dB as I recall.

Alan  N1AL

> Aside from the frequency, I can find nothing about the characteristics
> of the K3 "IF OUT" feed. Could some kind person provide info about
> bandwidth, levels, etc...?
>
> John Ragle -- W1ZI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html