(no subject)
Posted by
Jim Sheldon on
May 01, 2011; 11:40am
URL: http://elecraft.85.s1.nabble.com/no-subject-tp6321212.html
Oops - forgot to turn HTML off in my reply.
Gary and others,
In case you are switching between 100 Watts and QRP 5 watts, there is another way rather than the power per band. I emailed Philippe direct on this one - you can set up a macro to switch between any two power settings very easily using the PC command. That's what I did when I got tired of cranking the knob to get down to 5 watts for the QRP sprints. That way it isn't band dependent and a quick tap or hold of one of the programmable buttons does the trick.
Even if you aren't a programmer, there are all sorts of little tricks like that in the K3 Programmer's Reference.
Jim - W0EB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html