KPA-500 "Output for Input" schedule?

Posted by stan levandowski on May 11, 2011; 5:06pm
URL: http://elecraft.85.s1.nabble.com/KPA-500-Output-for-Input-schedule-tp6352735.html

The documentation on the Elecraft site says the KPA-500 requires 40
watts drive for full output.

Nowhere (at least not that I could find) is the minimum drive
requirement specified nor is there any schedule of "output for input"
such as 40 watts = 500 watts; xx watts = 250 watts, etc.

More to the point -- can a K3/10 or a K2/10 be connected to the KPA-500
and deliver something between 75 and 100 watts output?

??

Thanks,


73, Stan WB2LQF
KX1 #2411    K1#2994    K2# 6980    K3#5244     K9 #1 (Cocoa the
Chihuahua)
Everything is QRP, even the dog.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html