Posted by
k.igor on
May 22, 2011; 5:27am
URL: http://elecraft.85.s1.nabble.com/KX3-RX-IQ-output-question-tp6389769p6390781.html
Bruce,
What would be the point of tapping IQ after the roofing filter?
Somewhere in the posts I thought I read KX3 will use one BPF per band, so
the bandwidth probably will cover full band. After that you are at mercy of
your sound card.
Dual watch is in DSP. The IQ signals should come out before DSP, so the Dual
Watch has no bearing on IQ output.
By the way, with SDR and this DSP one probably could implement Triple or
Quadruple Watch. Question is: where to obtain more ears? :-)
73,
Igor, N1YX
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Bruce Beford
Sent: Saturday, May 21, 2011 12:47 PM
To:
[hidden email]
Subject: [Elecraft] KX3 RX IQ output question
Wayne, I know you don't have anything to do but answer questions... ;-)
I didn't get a chance to ask this last night during the KX3 webcast:
What will be the usable bandwidth of the RX IQ output? Since the dual watch
capability is described as +/- 10 KHz, I am wondering if this is the total
BW at this output jack. Also, will this be tapped off before the optional
roofing filter module?
Thanks in advance,
Bruce, N1RX
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html