Posted by wayne burdick on May 25, 2011; 6:06pm URL: http://elecraft.85.s1.nabble.com/kx3-solderless-tp6403772p6403841.html
It will be a no-soldering kit. There are hundreds of SMDs, so the
boards have to be pre-aligned and tested.
73,
Wayne
N6KR
On May 25, 2011, at 11:03 AM, R. Kevin Stover wrote:
> I'd be shocked if it wasn't.
>
> Less than one in 10 kit builders have the skill or equipment necessary
> to do reliable SMT construction. We might be able to pull off the
> occasional SMT part swap but that's a different animal than fully
> populating a bare board with SMT parts.
>
> Why would Elecraft open themselves up to that kind of support
> nightmare?
>
>
>
> On Wed, 25 May 2011 12:50:25 -0500
> "gerald bokowy" <[hidden email]> wrote:
>
>> Is the plan for the KX3 to be asolderless kit?
> --
> R. Kevin Stover
> AC0H
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html