http://elecraft.85.s1.nabble.com/KX3-Quesiton-on-PC-Control-tp6411610p6412116.html
> At 09:00 AM 5/27/2011 -0700, you wrote:
>
>
>> What does this mean and how does this work? See the following quote....
>>
>> "Accessory/RS232 port for computer control using supplied cable"
>>
>> Is there a port on the rear for a serial connection....or what? I did not
>> look
>> at that when I saw it at Dayton. Can this be clarified?
>>
>> Lee - K0WA
> Hi Lee
>
> There are 3 connectors (1/8 stereo ?) in a row on the left side marked ACC,
> KEY, PHONES. The first connector marked ACC gives RS232 access. Since it
> is not the traditional 9 pin RS232 connector (which would be rather large
> for such a small radio) a special RS232 cable is required to interface with
> an external computer. A stereo plug could carry data in/out quite
> easily. It also mentions that the KX3 uses the same commands as the K3. I
> assume that digital/control software like MixW would be able to work with
> the KX3 in much the same way as the K3. In addition to these 3 connectors
> there are 2 more (1/8" stereo ?) connectors ... one for the Mic/PTT and RX
> I/Q which could be used for other interesting functions ... like a
> pan-adapter ?
>
> Jim - VE3CI
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html