Posted by
wayne burdick on
URL: http://elecraft.85.s1.nabble.com/KX3-Features-tp6430001p6430021.html
On Jun 1, 2011, at 10:51 PM, Bob W9RFS wrote:
> Will the KX3 be capable of synchronous detection?
Yes, but possibly not in the first production firmware release.
> Also, I was wondering if
> you are going to be able to monitor voltage and current like you can
> on the
> K3.
Yes.
> If so, then would it be possible for the current consumption to be
> monitored as well as voltage maximums/minimums?
There's a menu entry to set the minimum voltage before a "LO BATT"
warning shows up. "HI CUR" will be flashed if transmit current drain
is excessive (and power will be automatically reduced in this case,
just like on the K2 and K3).
> There is a product called
> the "Watts Up Meter" which I have used with my K3 in the field which
> measures: Amp hours (Ah), Watt hours (Wh), voltage, Watts and
> captures peak
> current (Amps), peak power (Watts) and voltage sag (minimum Volts).
> It could
> come in handy while trying different types of batteries. I think
> some sort
> of facility to more precisely estimate your internal/external battery
> reserves would be useful with the KX3.
Great idea, saved in the Future Firmware file.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html