K2 off frequency

Posted by yo2liw on Jun 07, 2011; 10:17am
URL: http://elecraft.85.s1.nabble.com/K2-off-frequency-tp6448902.html

Hello Om’s



I am the happy owner of a K2 and I need some advices on the alignment
procedure.  My K2 is off frequency by about 300Hz. (I'm using an Orion for
the test)

I start from “4MHz Oscillator calibration” using an external counter. On TP3
the frequency on the internal counter is abt 12078 and 12.043 to 12044 on
the external one. I try to modify the value of C22 but no chance to make the
two equal. Until now I make all the measurements with the internal counter
and on the "PLL reference oscillator range test" the range was around 18 KHz
which I think is too much.



Any ideas?



Thank you!



Adi, Yo2liw

K2 Sn 4010

--
==============
Adrian Toplician
0721 367 850
Timisoara
YO2LIW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html