Posted by Jack Brindle on URL: http://elecraft.85.s1.nabble.com/KPA500-OPER-STBY-Status-Comms-Bug-With-K3-tp6450518p6451408.html
This is a timing problem in the communications, and will be fixed in the next firmware release.
Jack Brindle, W6FB
Elecraft Engineering
On Jun 7, 2011, at 10:05 AM, John K3TN wrote:
> If I hit the Oper/Stby buttons on the KPA500, the K3 displays a message and
> selects the proper power drive level. However, I've enabled BAND CHG to
> STBY, which switches the KPA500 to STBY whenever I change bands. It does
> that, but going to STANDBY by changing bands does NOT send the STBY message
> to the K3, so the K3 drive level stays at the OPER level, even though the
> KPA500 is in STBY.
>
> Shouldn't the KPA500 tell the K3 it has gone to standby via QSY? That would
> keep things in synch better.
>
> John K3TN
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-OPER-STBY-Status-Comms-Bug-With-K3-tp6450518p6450518.html > Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html