Re: KPA500 driven by KX3 ... what output to be expected ?

Posted by Igor Sokolov-2 on
URL: http://elecraft.85.s1.nabble.com/KPA500-driven-by-KX3-what-output-to-be-expected-tp6495043p6495279.html

KX3 would require power supply anyway. Another approach would be to have 13v
power supply built in into KXPA100. Then this PS could be used for KX3 while
operating from the base.
BTW my Expert 1K-FA delivers 400 watts out when driven with 10 watts.

73, Igor UA9CDC
----- Original Message -----
From: "Enno Korma, PF5X" <[hidden email]>
To: <[hidden email]>
Sent: Monday, June 20, 2011 2:59 PM
Subject: [Elecraft] KPA500 driven by KX3 ... what output to be expected ?

> Hi all,
>
> I believe once the KX3 is shipping it would be interesting to use it with
> the KPA500. Given the rel. small size of the KPA500 and its built-in PSU,
> the total package may be even smaller then a KXPA100 + stand-alone PSU.
> Only
> question, is the KPA500 usable with 10W drive, and what will be the output
> of the KPA500 with that drive level (and what about its efficiency).
>
> Enno, PF5X
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html