Re: KX1 - S/N 2543 Build Update
Posted by
Don Wilhelm-4 on
Jun 24, 2011; 1:03pm
URL: http://elecraft.85.s1.nabble.com/KX1-S-N-2543-Build-Update-tp6511485p6511877.html
Ken,
Cutting the leads of the relay before soldering can cause internal
damage to the relay - solder first and then trim the leads.
73,
Don W3FPR
On 6/24/2011 6:13 AM, Kenneth Race wrote:
> Second question: I read ahead a little on the Part 2 instructions and was a
> little confused with the C56 installation on page 34. Why does it have you
> solder pins 2 and 3 of K1 when it seems that you cut them later and then
> solder C56 to the pads? Wouldn't it be neater to cut the leads before
> soldering and then put C56 on those pads? Or am I misunderstanding that
> step?
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html