Re: Getting BCD Band Data from the K3/KPA500 when they areconnected.

Posted by Andy Faber on Jun 26, 2011; 12:55am
URL: http://elecraft.85.s1.nabble.com/Getting-BCD-Band-Data-from-the-K3-KPA500-when-they-are-connected-tp6515752p6516105.html

Pete,
  A simple Y cable works fine for connecting my TopTen Band Decoder box and
KPA500 to the AUX connector on the K3.
  73, andy ae6y

--------------------------------------------------
From: "Peter Chamalian" <[hidden email]>
Sent: Saturday, June 25, 2011 1:57 PM
To: <[hidden email]>
Subject: [Elecraft] Getting BCD Band Data from the K3/KPA500 when they
areconnected.

> Has anyone with a K3 and KPA500 interfaced the pair with a microHAM
> station
> master or other device that uses the band data to control other equipment
> such as antenna switches?
>
> If the K3 and KPA are connected together with the AUX cable, how can one
> connect the Station Master or other equipment that can benefit from the
> band
> data?  Is it as simple as using a Y connector or is there more to it?
>
>
>
> Pete, W1RM
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html