Re: Boots for the XG3...
Posted by
Alan Bloom on
Jun 27, 2011; 1:22am
URL: http://elecraft.85.s1.nabble.com/Boots-for-the-XG3-tp6514422p6518562.html
The other problem with adding boots to the XG3 is key clicks. As I
understand it, there is no key shaping. Not a problem with a 1 mw
transmitter but it might be objectionable with 20 watts.
Alan N1AL
On Sat, 2011-06-25 at 10:00 -0400, Joe Subich, W4TV wrote:
> > So, I am asking the list: "Is there any interest out there amongst XG3
> > owners in having Elecraft bag up a partial kit as outlined above?"
>
> If such a kit was to be made available, I would suggest a gain block
> capable of operation on the three highest bands (28-148 MHz) with the
> necessary LPF values for each band.
>
> I'm also not sure that a kit should be capable of much more than 1 W
> output as a bunch of 20 W signals with fairly high levels of phase
> noise would not be exactly welcome on most bands.
>
> 73,
>
> ... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html