KAT500 Suggestions
Posted by
Frederick Atchley on
Jul 01, 2011; 6:55am
URL: http://elecraft.85.s1.nabble.com/KAT500-Suggestions-tp6536670.html
Eric and Wayne,
To optimize desktop space I suggest the upcoming KAT500 be designed so that
its tilt stand arm can be installed in either the front (normal) or back of
the unit. That way if I set it atop a front tilted KPA500 I could raise the
back of the tuner to offset the tilt, which would a nice.
And, it would be great if I could switch between the two coax feedlines that
I have set up. Sure, this would require software differentiating the antenna
switching by the K3 and antenna switching by the tuner. However, it would
simplify operation and greatly reduce the possibility of me using the wrong
antenna.
BTW, the KPA500 kit is working FB. Congratulations to all.
Fred, AE6IC, K3 2241, P3 100, KPA500 115
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html