Re: [K2] K6XX zero beat indicator and the "Spot" function

Posted by Wayne Conrad on Jul 01, 2011; 4:23pm
URL: http://elecraft.85.s1.nabble.com/K2-K6XX-zero-beat-indicator-and-the-Spot-function-tp6538059p6538383.html

On 07/01/11 09:00, Don Wilhelm wrote:
> You might want to connect a 100k pot initially (the detector input
> connects to the wiper) so you can adjust it until you are satisfied with
> the detector sensitivity, then measure the resistance from the wiper to
> each end of the pot and substitute fixed resistors for the pot.

Don,

Are there any drawbacks to leaving the pot or trim-pot in the circuit
permanently?

73, Wayne Conrad KF7QGA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html