Re: [K2] K6XX zero beat indicator and the "Spot" function

Posted by Don Wilhelm-4 on Jul 01, 2011; 4:48pm
URL: http://elecraft.85.s1.nabble.com/K2-K6XX-zero-beat-indicator-and-the-Spot-function-tp6538059p6538461.html

  Wayne,

No drawbacks as long as it is of a size the physically fits somewhere
between the front panel and the control board.

73,
Don W3FPR

On 7/1/2011 12:23 PM, Wayne Conrad wrote:

> On 07/01/11 09:00, Don Wilhelm wrote:
>> You might want to connect a 100k pot initially (the detector input
>> connects to the wiper) so you can adjust it until you are satisfied with
>> the detector sensitivity, then measure the resistance from the wiper to
>> each end of the pot and substitute fixed resistors for the pot.
> Don,
>
> Are there any drawbacks to leaving the pot or trim-pot in the circuit
> permanently?
>
> 73, Wayne Conrad KF7QGA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html