Re: P3 Cursors

Posted by Jim Sheldon on Jul 08, 2011; 7:40pm
URL: http://elecraft.85.s1.nabble.com/P3-Cursors-tp6563772p6563889.html

I regressed to 1.05 and it still has the same problem.  Took it all the way back to 1.00 and the cursors follow the shift and width settings properly.  

Alan, you might want to look closely at where this went awry between version 1.00 and 1.05 as it was carried over into 1.08 and since I operate more CW than SSB I didn't notice it until working SSB on 6 meters early this afternoon.

Jim Sheldon - W0EB

> Since loading beta version 1.08, I've noticed that the SSB cursors
> get narrower with the passband "shift" settings, but won't go to
> the left of the center line in USB and the same holds true for LSB.
> I don't remember the U shaped cursors doing this before.  The CW
> cursors will move either side of the center line and not change
> width with the "shift" control.  The width of the cursor does
> change as it should with use of the "width" control in both CW and
> SSB modes.
>
> Is this the way it's supposed to work or is it a bug that I just
> came across?  I haven't seen anything reported on this before, so
> don't know for sure.
>
> Jim Sheldon - W0EB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html