the P3 and K3. Certainly some sort of widely different gain setting on
2m. BUT looking at the IF out the signal levels are "proper" as I did
> It could be that the MENU:XV_Gain setting for two meters got wildly
> wrong somehow. You might try changing it. Another possibility would be
> to do the parameter initialization (under Troubleshooting in the
> manual).
>
> Alan
>
> On Sat, 2011-08-06 at 16:40 -0400, Tom Azlin N4ZPT wrote:
>> Hi Stan,
>>
>> Adjusting the ref level does not help. Looking at the IF output of the
>> P3 the actual signal level is not changing when I switch between 6m and
>> 2m. I hooked up my QS1R SDR and can see the signals fine when the P3
>> water fall display is orange when I am on 2m. I can not find a ref level
>> that works. Radio is working fine on 2m as I can copy signals fine.
>>
>> When i disconnect the serial cable between the P3 and K3 the display is
>> fine minus frequency and filter info of course.
>>
>> All the software is up today. Both of my K3s do this.
>>
>> Any ideas gang??
>>
>> 73, tom n4zpt
>>
>> On 8/6/2011 11:13 AM, Stan Gibbs wrote:
>>> Tom,
>>>
>>> Sounds like your "Ref Lvl" is set too high. The color of the waterfall
>>> reflects the vertical position of the trace in the frequency display. If
>>> you reduce the reference level, the frequency display will return to a
>>> viewable position, and the orange waterfall will revert to blue.
>>>
>>> The reference level is per-band so you have to adjust it for each band you
>>> operate on. For my 2m setup the ref level is set at -145 dBm, which allows
>>> me to see the frequency trace when the pre-amp is on or off.
>>>
>>>
>>>
>>> -----
>>> 73, Stan - KR7C
>>> --
>>> View this message in context:
http://elecraft.365791.n2.nabble.com/P3-P3-and-K144XV-tp5472582p6659797.html>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>>> Help:
http://mailman.qth.net/mmfaq.htm>>> Post: mailto:
[hidden email]
>>>
>>> This list hosted by:
http://www.qsl.net>>> Please help support this email list:
http://www.qsl.net/donate.html>>>
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net>> Please help support this email list:
http://www.qsl.net/donate.html>>
>
>
>
>